Add an option in the Model Settings tab to display the body coordinate system. Add an option in the Model Settings tab to display any suppressed DOF.

It will be good if MOSES Potvue provide an option under POST JOINT_CAN command to generate joint strength UC for all load cases instead of just maximum value. This option will be helpful to exclude joint strength UC requirement which has load UC &...

We are often given the RAO curve calculated in WAMIT and would like to have the means to define these curves in MOSES for transportation analyses. This feature is currently available in Maxsurf Motions (File|Import|RAO Text..)

Especially while modeling tubtanks inside the legs of a jacket, it is usefull to make sure the location of the tank is correct. Also for reporting to client, the picture is usefull to fast understanding. The best way is to be able to display on th...

Please add support for 3D Connexion SpaceMouse for zoom/pan and rotation in the graphic views. It would make life so much more pleasant with effective use of the second hand. Works great in Microstation and Rhino, other apps support it too.

There is no visual way to check the correct postion and orientation of these connector type. When building a new model a lot of time is lost to check correctness of the model. LMU's are the worst. I start with modelling line connectors first to b...

WHEN PERFORMING "BATCH ANALYSIS" ALL LOADCASES and ALL DAMAGE CASES ARE USED. It could be usefull to be able to select which combinations loadcases/damagecases will be calculated. it would be a great time saver ! Further : it could be also appreci...

User suggestion: When viewing a part in Plate Strain display, the scale is too high on the colour chart. I need to see the colour change at a lower value, perhaps 0.25% maximum (instead of 0.5%).

Annotations are often overlapped or masqued by the solid shape of the model and unreadable.

Since its inception, Marker Error has lacked a sign convention and therefore not indicated the direction of the error, i.e. inside or outside a linked surface. It would be helpful for a sign convention to be applied so that the direction of the er...